Grip tape Start Grip Tape Service 4-pack

Universal grip wax / grip tape

– For temperatures +5°…-20°C
– Suitable for all snow types
– Easy to use
– One application lasts 150 to 250 km
– Set includes: 1 x 5m tape kit + 3 extra rolls (1 roll is enough for waxing 2-3 pairs of skis)

You can find a video on applying GRIP TAPE here

Instructions for use (see also the drawing on the packaging)

1. Thoroughly clean the grip zone of the skis (30-50 cm in the middle of the skis) with wax remover. Make sure the area is completely dry after cleaning.
2. Sand the cleaned area with the sandpaper found on the side of the product – side A (see the drawing on the packaging). The entire grip zone must be sanded thoroughly, first crosswise and then lengthwise.
3. Place the end of the Grip Tape at the beginning of the sanded grip zone and press it down. Apply the Grip Tape wax strip to the ski along the entire grip zone.
4. Cut the Grip Tape as follows: press the brake, side C, with your fingers. Lift the box upwards. Press side D against the wax strip. Fold the cut end over.
5. To avoid air bubbles between the wax and the ski surface, firmly smooth over the entire Grip Tape with side E.
6. Remove the paper with a quick pull. If some air bubbles still remain, put the paper back, smooth again with side E and remove the paper.
7. Let the skis cool down outdoors. Do not touch the waxed area with your hands and do not press the skis together, so that the waxed areas do not come into contact.