Brush Start COMBI nylon/brass

Brushes are used for cleaning excess paraffin from the glide zones of the ski base, opening up the ski base structure and polishing the ski base.
Proper brushing ensures excellent glide.

COMBI BRUSH (nylon / brass)

– One half of the brush is brass, the other half stiff nylon
– Brass – for cleaning the ski base structure
– Nylon – for cleaning both soft and hard paraffins from the ski base

Instructions for use

After removing the excess wax with a scraper, push the metal brush from tip to tail until the ski base structure is clearly visible. Next, brush the ski base clean with a nylon brush.
If you have the option/wish to use different brushes, the principle is to start with the coarser brush. A brass brush is used first, followed by a copper brush, then a steel brush, then a stiff nylon brush, then a softer nylon brush  and, if powder is used in the waxing, finally a short-bristled soft nylon brush.
Use metal brushes for brushing in one direction only (mark an arrow on the brush so that you always use it in the same direction).